Power supply voltage | 12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.) |
---|---|
Current consumption | 45mA DC Max. |
Power consumption | 1080mW DC Max. (at 24 VDC) |
Control output (Output type) | NPN open collector output |
Control output (Load current) | 0 to 50 mA |
Control output (Residual voltage) | (DC) 1 V Max. (Load current 50mA Max.) |
Operation mode | Light-ON/Dark-ON selectable |
Load power supply voltage | 26.4 VDC Max. |
Protective circuit |
Surge suppressor Output short-cut protection Power supply reverse polarity protection Mutual interference prevention |
Sensitivity setting | Teaching method |
Timer function |
ON-delay 1 ms to 5 s OFF-delay 1 ms to 5 s One-shot delay 1 ms to 5 s |
Function | External-input, remote setting, counter, differential operation |
Ambient temperature |
Operating: -25 to 55 CEL (Groups of 1 to 2 Sensors) Operating: -25 to 50 CEL (Groups of 3 to 10 Sensors) Operating: -25 to 45 CEL (Groups of 11 to 16 Sensors) Storage: -30 to 70 CEL (with no icing or condensation) |
Ambient humidity |
Operating: 35 to 85 %RH Storage: 35 to 85 %RH (with no condensation) |
Insulation resistance | 20 M OHM Min. at 500 VDC between charged parts and the case |
Dielectric strength | 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 150 Hz, 0.7-mm double amplitude for 1.5 hours each in X, Y, and Z directions |
Shock resistance | 500m/s2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP50 |
Applicable standard (EC Directive (Low Voltage Directive)) | EN60947-5-2 |
Applicable standard (EC Directive (EMC Directive)) |
EMI: EN60947-5-2 Emission Enclosure: EN55011 Group 1 class A EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4 CE marking: Equipped |
Connection method | Pre-wired models (Cable length: 2 m) |
Indicator | Operation indicator(orange), Digital display |
Weight (packed state) | approx. 100 g |
Material (case) | PBT |
Material (cover) | Polycarbonate |
Amplifier unit/sensor head of combination |
E3C-LD**/LR** |
This website uses cookies (Learn more) and has a privacy policy (Learn more).